
 [1mUAE-Control[22m

 You can run UAE-Control to change certain settings of the UAE emulator
 while it is running, and also to quit UAE. To close UAE-Control, click on
 the gadget on the top left of the window. Alternatively, on the Windows
 version of UAE, as well as in Fellow, you can press F12 to display the
 settings window of the emulator. (Please note that in some other versions
 of the emulation software, pressing F12 will cause the emulator to
 exit.)

 Switching off sound and setting the frame rate to a higher value (e.g. 2
 or 3) will speed up the emulation.

 Depending on the version of UAE, it may be that the Sound option has
 effect only if sound was enabled in the initial emulation settings.

 The Hard Reset option has the same effect as switching an Amiga off and
 on again (to "Soft Reset", press Ctrl-Amiga-Amiga, like on any other
 Amiga).

 Please refer to the texts included with the emulation software for
 additional information about the various settings.
